If you recently installed or updated Windows 10, you might experience some Wi-Fi issues. We’re here to help! Wireless networking problems are particularly annoying because there are so many things that can cause them. Maybe you’re missing a driver or your computer’s power options aren’t properly set. Did you check the wireless switch (if you have one)? So many things can go wrong.

In this article, we’re going to troubleshoot Windows 10 Wi-Fi by exploring the most common issues. Let’s get started.

Limited Connectivity

Many Windows 10 users get a limited connectivity message and it’s challenging to figure out what’s causing it. It can be triggered by outdated drivers, a faulty Ethernet cable, your network adapter, or even the antivirus software you use. The only thing you can do is troubleshoot Wi-Fi one step at a time and hope for the best.

We’re going to try the most common solutions, but make sure to try other fixes mentioned in this article if those don’t work.

Run the Networking Troubleshooter

The first thing you should try is the built-in Windows 10 networking troubleshooter. In a lot of cases, Wi-Fi problems can be solved automatically.

The easiest way to access this resource is to type troubleshoot in the search box and select the Find and fix network problems option.

This opens the Internet Connections panel.

Let Windows diagnose the networking issues and apply any suggested fixes. If this doesn’t help, you should also troubleshoot the network adapter. Type troubleshoot network adapter in the search box and follow the same steps.

Reset TCP

If the troubleshooter found an error that says Wi-Fi doesn’t have a valid IP configuration, you should reset the TCP/IP. This is the most common solution to this problem, although outdated drivers can also cause it.

To reset the TCP, type command prompt in the Windows search box. Before you launch the prompt, make sure to right-click and select the Run as administrator option otherwise some commands might not work.

Next, type the following commands separately by pressing the Enter key after each one:

netsh winsock reset

ipconfig /release

ipconfig /renew

netsh int ip reset

ipconfig /flushdns

Restart your computer and check if your wireless connection works now. If it doesn’t, continue to troubleshoot Wi-Fi using our tips below.

Check Your Antivirus

Having antivirus software is important, but it can sometimes cause a conflict that leads to a limited internet connection message. Take note that Windows Defender, the antivirus that comes with Windows 10, shouldn’t cause any problems with your wireless connection.

Most users report that third-party antivirus software can block Wi-Fi. So if you’ve been struggling with trying to figure this out, try disabling your antivirus. If BitDefender, Avast, AVG, or a similar antivirus is indeed the culprit, uninstall it.

Missing Wi-Fi Icon

In some cases, wireless is disabled. You can’t find the Wi-Fi icon and if you dig deeper into your network settings you won’t find a wireless section.

A lot of users report this problem, especially after a clean Windows 10 install. This is usually due to missing or outdated Wi-Fi drivers. The Wi-Fi module might also be the culprit if you purchased one so make sure it’s properly connected.

That said, there are several solutions you can try.

Check for Updates

Start looking at your drivers, especially if you just installed Windows 10. A lot of users install the operating system without connecting their machine to the Internet. As a result, Windows can’t install any drivers automatically during the installation process, so some of them will be missing.

1. Navigate to the Settings panel and select Updates & Security.

2. Next, you need to check for driver updates by clicking on View optional updates.

3. Click on Driver updates to see if you have anything to download.

In your case, you should have other drivers than the ones seen in this image. Hopefully, one of them is the Wi-Fi driver. Make sure you’re connected to the Internet through a network cable or your smartphone’s connection and download the drivers.

Reinstall the Wi-Fi Driver

In some cases, the Wi-Fi driver is corrupted, and updating it won’t do anything. What you need to do is reinstall it. To do that, you need first uninstall the driver and then either check for updates using the previous solution or download it from the manufacturer’s website.

To remove the existing driver, head over to the Device Manager and look for your Wi-Fi driver under Network adapters.

Select your wireless driver, double-click to launch the Properties panel, and navigate to Driver. There you’ll find the Driver Details button, which will tell you everything you need to know about the driver.

You need this information if you want to download and install the driver from the Wi-Fi card manufacturer’s website.

Now, go back to the driver inside the device manager, right-click on it, and select the Uninstall device option. This will remove the driver from your computer so that you can properly install it.

Once the driver has been removed, you can either go back to the Check for Updates panel we talked about above or to the manufacturer’s website. Either way, install the driver and restart your computer.

Wi-Fi Disconnected After Sleep Mode

Your wireless connection works just fine until your computer enters Sleep/Hibernate mode? Chances are you’re dealing with an annoying power-saving option that keeps your computer from returning your Wi-Fi connection after it wakes up. To fix this, type Power Plan in the Windows search bar and select Edit Power Plan. This opens your computer’s current power plan settings. Then click on the Change advanced power settings option.

Scroll to Wireless Adapter Settings, expand it, and change the Power Saving Mode to Maximum Performance.

Other Wi-Fi Troubleshooting Tips

There are a few other things you can try at this point if none of the previous tips fixed your Wi-Fi connection.

Configure Your Network Adapter

Are you sure your network adapter is properly configured? Go to Network and Sharing Center and click on Change adapter settings to open the Network Connections page. Right-click on your Wi-Fi adapter and select Properties.

You need to find Internet Protocol Version 4 (TCP/IPv4). Select it and click on the Properties button.

Are the Obtain an IP address automatically and Obtain DNS server address automatically options selected? If they aren’t, enable them.

Reset Your Router

Router configurations can sometimes interfere or conflict with your computer’s Wi-Fi settings. This issue can pop over time or if you played with the router’s settings. Either way, you should try resetting it to its default settings.

There are a few ways of resetting your router. Generally, you can either press the tiny, hidden reset button or go to the router’s configuration page and do it from there.

Check the Wi-Fi Switch

Some laptops still come with a switch that enables or disables Wi-Fi. If that’s the case with yours, make sure to check that it’s set to ON.

Device Interference

Certain devices can interfere with the Wi-Fi signal. Check the frequency specifications of your microwave oven, phone, speakers, and other electronic devices. If they match the same frequency used by your router, you should try turning them off.

If your problem is caused by a household device, the solution is to move the router away from it.

Last Resort – Update or Reset BIOS

If you tried every single troubleshoot Wi-Fi step above, you should try this solution.

Updating BIOS used to be something most people avoided at all costs, but nowadays with modern motherboards, it’s quite easy to do. Just make sure you read the instructions that came with your motherboard and backup your data.

Alternatively, you can also try resetting BIOS to its default settings.

As mentioned at the start of the article, a lot of things can make your Wi-Fi go haywire. Hopefully, one of our solutions has worked for you. If not, then you probably have a hardware problem and you should inspect the wireless module.

 

If this tip helps and you would like to donate click on the button. Thanks In Advance.

________________________________________________________________________________________________________

"Fortune Favors, Who Value Time over Money!"

"TeQ I.Q. was the 1st IT Company to Deliver Cloud Solutions since 2003"
Tech issues taking up your Time?
"TeQ I.Q. Makes Your Technology Secure and Protected"
Do you have Tech Frustrations like your Computer, Internet, Phone, Cellphone, Camera, TV, Car?

    "Afraid of Online Hacking?"

"SECURE your Internet and Devices with before it's too late!"

For more info go to https://www.teqiq.com/vpn/

"We Take Away Your Tech Frustrations and Give You the Free Time You Deserve!"
Call Robert to ask all your Technology questions.

For Free Consultation Call Now Robert Black at (619) 255-4180 or visit our website https://www.teqiq.com/

Chase Bank and Others Trust TeQ I.Q. with their IT and TeQnology so can you!